Latest technology on how to light up your bulbs in your home with only plugs, wire and magnet.

opera.com
1d

Welcome once again to technology platform, today I will be showing you the latest and trending technology on how you can light up the bulbs in your home by simply using plugs, wire and magnet. Which means no more darkness for you at night in your house.

Materials needed are: two plugs, a copper wire, gum, wooden ply board, Lampoder, and solder iron.

Below are the step by step procedures to follow:

Step 1. Have two plugs of the same make.



Step2: Get a wooden ply board and place a gum on two of its sides.



Step 3: place the two plugs on the gum which is on the wooden ply board as shown below.





Step 4. Wind a copper wire on a metal so that it would have two edges and form a ring shape as shown below





Step 5. Solder the formed ring wire on the plugs using the solder iron



Step 6. Bring your lampoder and connect two wires to it and screw tightly.





Step 7. Put some gum on the bottom of the lampoder and stick it to the wooded ply board.





Step 8. Connect the remaining two sides of the wire which has been fixed to the lampoder to the two plugs and solder it.



Step 9. Place a bulb on the lampoder and get a magnet.



Step 10. Place the magnet in between the two plugs as shown below and here comes your light full voltage as it can generate up to 220v. To put it off, simply remove the magnet and the light will go off.







Thanks for taking time to follow through, try it now and see it for yourself. Kindly share to others to see this wonderful discovered way of eliminating darkness at night in our home. No more panicking on how to get fuel for Generator or been disappointed by PHCN.

Follow us and drop your comments as I am planning to bring to you how to power your plasma and DVD set without generator or PHCN light as well.

Like